Specifically, the central air-exposed region was characterised by crystalline and granular structures (Figure 7) which were often surrounded by agglomerations of bacterial cells. Other biofilm structures, such as the formation of fibres between crystals, were only rarely found. Bacterial

cells embedded along the fibres were apparent following IWR-1 supplier acridine orange staining. Figure 5 Cells of P. aeruginosa SG81 adhere in patches to Lotrafilcon B after 72 h incubation. Transmitted light micrograph: deposits and adherent bacterial cells on the contact lens https://www.selleckchem.com/products/cobimetinib-gdc-0973-rg7420.html are visible as grey dots and shadows. DAPI staining of the biofilm (blue) shows all adherent bacterial cells (viable and dead). CTC staining of the biofilm

(red) shows the metabolic activity of the viable bacterial cells. Superimposition of the transmitted light micrograph and the fluorescence micrographs (merge) shows the correlation of the CTC and DAPI stained regions. The three-dimensional representation gives an illustration of the spatial structure and the thickness of the biofilm matrix (~12 μm). Bar = 20 μm. Figure 6 Small colonies of P. aeruginosa cells are dispersed homogeneously and thinly throughout the biofilm matrix on Etafilcon A after 72 h growth. The non-confocal transmitted light micrograph and the acridine orange stained micrograph are x-y projections of a slice of the Sepantronium manufacturer z-stack (z = 12 μm) of the biofilm matrix. Bacterial cells were stained with the dye acridine orange to observe the total amount of bacterial cells (viable and dead). The three-dimensional representation of the biofilm stained with acridine orange illustrates the distribution of the bacterial cells throughout the biofilm matrix and the thickness of the biofilm matrix (~ 30 μm).

Furthermore, the fluorescent dye acridine orange intercalates not only into nucleic acids but Resveratrol also into the contact lens hydrogel polymer matrix. Figure 7 Various, rarely observed biofilm structures such as crystals, granular materials and fibres on the air-exposed contact lens surface after 72 h growth. Extensive agglomerations of bacterial cells were found to adhere to the surface of crystals and granular materials. Crystals and granular materials were also associated with the formation of fibres. Acridine orange staining of the fibres verifies the presence of bacterial cells throughout the fibres. Bar = 20 μm. Various biofilm structures were also observed by SEM (Figure 8). SEM micrographs of samples prepared according to the method of dehydration by immersion in increasing concentrations of ethanol followed by critical point drying depicted networks of EPS formations with fibres and clumps. Ethanol preparation led to denaturation of proteins within the EPS, resulting in a clear visualisation of exposed bacterial cells (Figure 8A-C).