The animals were killed 6 weeks after their surgery, and their parietal bones were harvested. The specimens were analyzed with microscopic computerized tomography (microCT) scans and histomorphometrics.

Results. The unfilled normobaric control bony defects did not heal, proving the critical-size nature of these defects. The presence of autogenous bone

or bone ceramic in the defects increased the bone volume fraction and bone mineral density of the defects AZD9291 (P < .001). The presence of a membrane in the ungrafted and autogenous bone grafted defects resulted in a decrease in the corrected bone volume fraction (P = .002) but not in the bone ceramic grafted defects (P = .580). Bony healing of defects where the membrane was unsupported was

compromised; the membrane did not maintain the desired bone regeneration volume with the unfilled and autogenous bone grafted groups. The PEG resorbable liquid membrane worked best with the bone ceramic material. HBO did not ameliorate the healing of the autogenous bone graft or ceramic filled defects in the 6-week time period of this study.

Conclusions. Although the PEG resorbable liquid membrane is easy to use and forms an occlusive layer, caution is recommended when using the membrane over an unsupported defect. HBO did not ameliorate bony healing with the membrane this website at the early 6-week time point. The authors recommend future assessment with HBO at the 12-week time point. (Oral Surg Oral Med Oral LGX818 Pathol Oral Radiol Endod 2010; 109: 372-384)”
“Industrial hemp fibers were treated with a 5 wt % NaOH, 2 wt % Na(2)SO(3)

solution at 120 degrees C for 60 min to remove noncellulosic fiber components. Analysis of fibers by lignin analysis, scanning electron microscopy (SEM), zeta potential, Fourier transform infrared (FTIR) spectroscopy, wide angle X-ray diffraction (WAXRD) and differential thermal/thermogravimetric analysis (DTA/TGA), supported that alkali treatment had (i) removed lignin, (ii) separated fibers from their fiber bundles, (iii) exposed cellulose hydroxyl groups, (iv) made the fiber surface cleaner, and (v) enhanced thermal stability of the fibers by increasing cellulose crystallinity through better packing of cellulose chains. Untreated and alkali treated short (random and aligned) and long (aligned) hemp fiber/epoxy composites were produced with fiber contents between 40 and 65 wt %. Although alkali treatment generally improved composite strength, better strength at high fiber contents for long fiber composites was achieved with untreated fiber, which appeared to be due to less fiber/fiber contact between alkali treated fibers. Composites with 65 wt % untreated, long aligned fiber were the strongest with a tensile strength (TS) of 165 MPa, Young’s modulus (YM) of 17 GPa, flexural strength of 180 MPa, flexural modulus of 9 GPa, impact energy (IE) of 14.